Robco has been manufacturing and distributing gaskets for more than 100 years and during this time has expanded its Gasket Division to manufacture an impressive array of grades and types of cut gaskets and sheet materials in all available sealing materials on the market today. Robco will custom cut gaskets to your specifications using the most efficient production equipment possible. Our flashcutters, waterjet, punches and travelling heads produced just under 1.8 million gaskets in the trailing 12 months.

Our RedOps technical team will use advanced modelling software to calculate the required bolt torque suitable for your applications and will review and recommend and if requested, train on best installation practices with your teams.

Always on the lookout for the latest innovations in gasket sheeting, Robco will keep introducing new materials to suit even the most difficult applications. Your Robco representative will review your requirements and offer the best solution to maximize your operations and lower your costs.


Scroll down to browse our gasketing material and rubber styles or select from the categories below:


FLEXIBLE GRAPHITE

Excels in extreme conditions,high temperatures and chemicals. High compressibility.

ROBCO 200-HM 204-SFI 210-STI

COMPRESSED MATERIAL

Sealing materials that stays flexible and pliable longer, most offer an extremely high load-bearing capacity, and seals better with an extended service life and less leakage in high temperature applications.

KLINGER ® TOP-SIL ML1 QUANTUM C-4300
  C-4401 C-4408 C-4409
  C-4430 C-4433 C-4439
  C-4500 C-4509 C-5400
  C-6400 C-7400 C-8200

PTFE BASED MATERIAL

PTFE materials for severe to more routine chemical process applications. These superior performing materials provide outstanding creep resistance to prolong time between service periods, while reducing maintenance and the cost of replacement parts.

KLINGER® SOFT-CHEM TOP-CHEM 2000 TOP-CHEM 2003
  TOP-CHEM 2005 TOP-CHEM 2006 TC-1003
  TC-1005 TC-1006 SEALON
 ROBCO Virgin PTFE JOINTEX

MICA

All milam mica laminates are suitable for use in hot, dry gas applications at low pressure such as exhaust manifolds, turbines, turbo chargers and air heat exchangers.

ROBCO MILAM PSS THERMICA  

RUBBER MATERIALS

We offer a vast selection of rubber materials available in rolls, sheets, or cut gaskets.

ROBCO 435F Red Rubber 460 Natural Gum 464 Black SBR
  465 Neoprene 466 Neoprene 467 Neoprene
  9370 White Nitrile 9863 Nitrile EP-60 EPDM
  EPP-60 Cured EPDM SI-60 Silicone VI-75 Viton®
  423-SBR-CI 2919 Coated Polyester 5700 Neoprene/Nylon
  5717 Neoprene/Polyester   ENERGIZER

SPONGE RUBBER MATERIALS

We offer a vast selection of rubber materials available in rolls, sheets, or cut gaskets.

ROBCO 602 Neoprene 1523 General Purpose SC-41 Soft Density
  SC-42 Medium Density SC-43 Firm Density White Silicone
  Microcellular Urethane    

CORK / RUBBER MATERIALS

Composition cork and cork rubber have different qualities that make them suitable in different applications.

ROBCO 100N Neoprene/Cork E-30 Neoprene/Cork E-40 Neoprene/Cork
  E-50 Neoprene/Cork E-70 Co-polymer/Cork FKS Beater Add
  GRC-36 Co-polymer H-35 Nitrile/Cork H-45 Nitrile/Cork
  H-55 Nitrile/Cork N104 Bonded Cork  
  HYDROIL Vegetable Fiber    

OTHER PRODUCTS

Other available products from Robco.

BOILER GASKETS     ALLPAX Gasket Cutters
RUBBER MATS      
SMALL PARTS      
TUBING      

                 

 

Robco 200-HM

99% Pure Graphite without reinforcement

200 HM Graphite gasket  
Compressibility Recovey Creep Relaxation
44% 15% min. 5%
Temp. Oxidizing
Temp. Mild Oxyd.
Temp. Non-Oxyd.
-400ºF - 850ºF -400ºF - 1200ºF -400ºF - 5400ºF
Gasket Factor /m
Gasket Factor /y Sealability
1.25 700 psi 0.5 ml/hr
Applications:
Low pressure applications.
 

A homogenous graphite gasket sheet for use in sealing conditions where low internal pressures exist. High quality industrial-grade (99% carbon) sealing element with low ash content and low leachable chloride levels, offers high compressibility and low creep.

     
high temperature applicationsChemical and acid applicationswater applicationsSteam applicationsOxygen applicationsFood applications Sheet size60L x 60"W Available thicknesses1/32" - 1/8"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 204-SFI

Stainless Steel Foil-reinforced Graphite Sheet

204-SFI Graphite gasket  
Compressibility Recovey Creep Relaxation
42% 17% min. 5%
Temp. Oxidizing
Temp. Mild Oxyd.
Temp. Non-Oxyd.
-400ºF - 850ºF -400ºF - 1200ºF -400ºF - 1800ºF
Gasket Factor /m
Gasket Factor /y Sealability
2 900 psi NA
Applications:
General Purpose.
 
Robco 204 SFI is a material of choice for sealing medium pressure applications. Robco 204 SFI can be used in a wide variety of chemicals applications.      
high temperature applicationsChemical and acid applicationswater applicationsSteam applicationsOxygen applicationsFood applications Sheet size60L x 60"W Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 210-STI

Stainless Steel Tang-reinforced Graphite Sheet

210-STI Graphite gasket  
Compressibility Recovey Creep Relaxation
42% 17% 5%
Temp. Oxidizing
Temp. Mild Oxyd.
Temp. Non-Oxyd.
-400ºF - 850ºF -400ºF - 1200ºF -400ºF - 5400ºF
Gasket Factor /m
Gasket Factor /y Sealability
2 2500 psi 1200 psi max.
Applications:
High-pressure / High temperature applications.
 
Robco 210-STI excels in aggressive, high temperature, high pressure applications. Can replace spiral wound gaskets in large and custom sizes. 210-STI is the choice material to ensure a long-lasting seal in di fficult applications.      
high temperature applicationsChemical and acid applicationswater applicationsSteam applicationsOxygen applicationsFood applications Sheet size60L x 60"W    Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Top-Sil-ML1

Synthetic Fibers and Elastomers

Top-Sil-ML1 gasket  
Compressibility Recovey Creep Relaxation
9% 50% min. NA
Thickness Decrease
@Compression 7251psi
Sealability
@75ºF 8% @572ºF 15% NA
Thickness Decrease after immersion Density
ASTM Oil IRM 4% ASTM Fuel B 8% 106 lb/ft3.
Applications:
Innovative multi-layered material
 
A combination of synthetic fibers and various elastomers bound in a multi-layer structure. Top-Sil ML1 has excellent properties such as less creep, high permissible load, delayed aging and leak-free sealing at high temperatures. Suitable for use in steam,oils, fuels, hydrocarbons and potable water.      
Chemical applicationswater applicationsPulp & Paper applicationsHeavy industries applications Sheet size78L x 59"W Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Quantum

2nd Generation Compressed Fiber Sheeting

Klinger Quantum  
Compressibility Recovey Stress Relaxation
10% 60% BS7531 3916psi
Thickness Decrease @Compression 7251psi
@75ºF 10% @572ºF 14% @572ºF 20%
Thickness Increase after immersion Density
ASTM Oil 3 3% ASTM Fuel B 5% 106 lb/ft3
Applications:
Best innovation in the fiber reinforced gasket composite
 
Exclusively HNBR bound, Quantum o¬ffers excellent temperature resistance across a much broader range of chemicals than all other fiber reinforced gasket materials. Klinger Quantum is FDA compliant for food applications and fire tested as per API 607/ISO 10497.      
Chemical applicationswater applicationsSteam applicationsPulp & Paper applicationsFood applicationsAerospace applications Sheet size78"L x 59"W Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4300

Aramid Fibers

C-4300 Aramid gasket  
Compressibility Recovey Creep Relaxation
10% 50% 25%
Thickness Decrease @Comp. 7251psi Sealability
@73ºF 10.5% @572ºF 25% <0.25 ml/hr
Thickness Increase after immersion Density
ASTM Oil 1 5% ASTM Fuel B 10% 100 lb/ft³
Applications:
General purpose sheet with good chemical resistance.
 
C-4300 is a general purpose material manufactured from aramid fibers with an NBR binder and is commonly used with hydrocarbons, fuels, oils and water. Provides good sealability and good chemical resistance.      
Chemical applicationsoil applicationswater applicationsSteam applicationshydrocarbs applicationsheavy industries applications Sheet size60L x 60"W Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4401

Synthetic Fibers

C-4401 synthetic gasket  
Compressibility Recovey Creep Relaxation
7% 50% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 10% @572ºF 17% <0.5 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 7% 112 lb/ft³
Applications:
Good general purpose material
 
Our most popular material suitable for use with air,
water, steam, oils, fuels, and gases. Particularly suited
for use in internal combustion engines, compressors,
and hydraulic applications.
     
Chemical applicationsoil applicationsOxygen applicationswater applicationsSteam applicationshydrocarbs applications Sheet size60L x 60"W Available thicknesses0.008" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

 

KLINGERsil C-4408

Wire Reinforced

C-4408 Reinforced gasket  
Compressibility Recovey Creep Relaxation
42% 17% 5%
Thickness Decrease@Comp. 7251 psi Sealability.
@73ºF 10% @73ºF 10% NA
Thickness Increase after immersion in Density
ASTM Oil 1 5% ASTM Fuel B 5% 119 lb/ft³
Applications:
Suitable for fluctuating temperatures & pressures
 
C-4408 material is a synthetic fiber based material with a nitrile binder reinforced with a steel woven mesh insert. Recommended for applications under high stress, vibration and fluctuating temperatures and pressures.      
high pressure applicationsChemical applicationshydrocarbs applications Sheet size60L x 60"W Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4409

Carbon Steel Insert

C-4409 reinforced gasket  
Compressibility Recovey Creep Relaxation
7% 50% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 10% @572ºF 22% NA
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 5% 119 lb/ft³
Applications:
Excellent for hot gases and high pressure applications
 
C-4409 is a synthetic fiber and nitrile binder reinforced with a galvanized low carbon steel insert excellent for use in hot gases, vibration and high temperature and pressure applications. C-4409 is used as a replacement for Spiral Wound Gaskets.      
high pressure applicationsChemical applicationsSteam applicationshydrocarbs applications Sheet size60L x 60"W Available thicknesses3/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4430

Fiberglass and Aramid Fibers

C-4430 glass aramid gasket  
Compressibility Recovey Creep Relaxation
9% 50% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 8% @572ºF 11% NA
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 5% 96 lb/ft³
Applications:
Premium grade material and excellent steam sheet
 
Glass fiber based with an NBR binder for use in a wide range of chemical applications. A premium grade compressed fiber material with exceptional compressive strength and good chemical and temperature resistance. For oil, steam, hydrocarbon,oxygen and water applications.      
high temperature applicationsOxygen applicationswater applicationsheavy industries applications Sheet size60L x 60"L Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4433

Fiberglass, Aramid & Inorganic Fibers

C-4433 glass aramid inorganic gasket  
Compressibility Recovey Creep Relaxation
7% 60% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 7% @572ºF 8% <0.5 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 7% 112 lb/ft³
Applications:
Best general purpose sheet . Fire-tested
 
Great general purpose material with good chemical resistance and mechanical properties. Best overall steam sheet with the best load bearing capability available in an asbestos-free gasket. C-4433 has passed the fire test criteria Mof API 607 Fourth Edition.      
high temperature applicationsoil applicationswater applicationsSteam applicationshydrocarbs applicationsFood applications Sheet size60L x 60"W Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4439

Fiberglass & Aramid, Steel Reinforced

C-4439 glass aramid reinforced gasket  
Compressibility Recovery Creep Relaxation
7% 50% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 8% @572ºF 4% NA
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 5-1% 131 lb/ft³
Applications:
Fire-tested and suitable for high pressures
 
A top quality synthetic fiber based material with a nitrile rubber binder. The addition of galvanized low carbon steel reinforcement provides high pressure resistance. C-4439 has passed the fire test criteria of API 607 Fourth Edition.      
high pressure applicationshigh temperature applicationsChemical applicationsoil applicationswater applicationsSteam applicationshydrocarbs applications Sheet size60L x 60"W Available thicknesses1/16" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4500

Carbon Fibers

C-4500 carbon gasket  
Compressibility Recovery Creep Relaxation
12% 60% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 10% @572ºF 15% <0.30 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 5% 87 lb/ft³
Applications:
Suitable for wide range of chemical applications
 
A premium grade carbon fiber based material with an NBR binder designed for use under high temperatures and pressures. A universal material with good steam, oil, and chemical resistance. Particularly suited for use in highly alkaline applications, high internal pressure applications and those requiring good load bearing characteristics.      
high temperature applicationsChemical applicationsPulp & Paper applicationsheavy industries applications Sheet size60L x 60"W Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-4509

Carbon Fibers, Steel reinforced

C-4509 reinfrorced carbon gasket  
Compressibility Recovery Creep Relaxation
12% 70% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 9% @572ºF 7% NA
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 5% 125 lb/ft³
Applications:
Excellent resistance to thermal degradation
 
A top quality carbon fiber based material with a nitrile rubber binder and an expanded steel reinforcement. Provides greater resistance to thermal degradation in high pressure applications and increased temperatures. Recommended in a wide range of media including oils, hydrocarbons, alkalis and steam.      
high pressure applicationshigh temperature applicationsChemical applicationswater applicationsSteam applicationshydrocarbs applications Sheet size60L x 60"W  Available thicknesses3/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-5400

Synthetic Fibers and Neoprene

C-5400 synthetic neoprene gasket  
Compressibility Recovery Creep Relaxation
8% 50% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 11% @572ºF 21% <0.20 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 10% 106 lb/ft³
Applications:
Designed for use with refrigerants
 
C-5400 is a blend of synthetic fibers with a neoprene binder. Introduced for service with refrigerants and various oils. Used in all industries where refrigerants are the major service, such as the Food Industry.      
Chemical applicationswater applicationsFood applications Sheet size60L x 60"W  Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-6400

Synthetic Fibers

C-6400 synthetic gasket  
Compressibility Recovery Creep Relaxation
8% 50% 20%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 12% @572ºF 11% <0.20 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 10% ASTM Fuel B 10% 112 lb/ft³
Applications:
Good swell characteristics
 
General purpose commercial material with synthetic fibers and an SBR binder. Suitable for oils, water, light/low pressure steam, and gases. This material has good swell characteristics, yielding a more tightly sealed joint.      
oil applicationswater applicationsSteam applications Sheet size60L x 60"W  Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-7400

Synthe123

C-7400 synthetic gasket  
Compressibility Recovery Creep Relaxation
7% 50% 25%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 9% @572ºF 5% <0.30 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 015% ASTM Fuel B 5-20% 94 lb/ft³
Applications:
Designed to handle strong chemicals at lower bolt loads
 
Engineered synthetic material to handle severe service, especially caustics because of its EPDM binder. This style has proven outstanding against light steam duty. Prime industries include pulp & paper, power generation and chemical.      
Chemical applicationsoil applicationsSteam applicationsPulp & Paper applications Sheet size60L x 60"W  Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGERsil C-8200

Synthetic Fibers

C-8200 synthetic gasket  
Compressibility Recovery Creep Relaxation
9% 50% 30%
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 7% @572ºF 17% <0.30 ml/hr
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 5% ASTM Fuel B 10% 106 lb/ft³
Applications:
Excellent choice for alkalis & acid resistance
 
C-8200 is a compressed fiber material developed for use with a broad range of chemicals; provides particularly good resistance to strong acids and alkalis. C-8200 is an economical alternative to PTFE-based materials in less aggressive applications.      
Chemical applicationsacid applicationscaustic applicationsoil applicationsPulp & Paper applications Sheet size60L x 60"W  Available thicknesses1/64" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Milam PSS

Reinforced Mica Sealing Material

Milam PSS mica gasket  
Compressibility Recovery Stress Relaxation
15% - 23% 40% - 50% min. 20%
Int.Pressure
Gas Leakage Stres Relaxation
29 psi >100 ml/min 2600 - 4641psi
Min. Temp. Max. Temp. Stress
NA 1472ºF - 1832ºF 11602 - 14503 psi
Applications:
A good universal packing for pulp & paper applications.
 
Milam-PSS is an asbestos free mica based sealing material reinforced with a stainless steel tanged insert. Speci fically designed for hot, dry gas applications. The outstanding chemical resistance of mica also makes the gasket suitable for a wide range of other applications.      
high temperature applications Sheet size47L x 40"W  Available thicknesses0.051" min.
  Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Thermica

High Temperature Gasket Material

Thermica ht gasket  
Compressibility Recovery Creep Relaxation
12% 55% NA
Thickness Decrease @Comp. 7251psi
Sealability
@73ºF 17% @572ºF 13% NA
Thickness Increase @Comp. 7251psi Density
ASTM Oil 1 8% ASTM Fuel B NA NA
Applications:
Excellent stability at high temperatures
 
High temperature material with a nitrile binder. The addition of mica increases usable temperature range. Exhibits excellent leak tightness, thermal stability and load bearing properties. Suitable for a wide range of low pressure applications including oils, fuels, steam, hydrocarbons.      
Chemical applicationsoil applicationsSteam applicationshydrocarbs applicationsPulp & Paper applicationsPetroleum applications Sheet size79L x 59"W  Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Top-Chem-2000

Fire-Safe and Chemically Resistant PTFE

Top-Chem-2000 gasket  
Compressibility Recovery Creep Relaxation
2% 55% min. NA
Thickness Decrease @Comp. 7251psi
Sealability
@75ºF 2% @480ºF 5% <0.5 ml/hr
Thickness Increase @Comp. 7251psi Density
Sulf.Acid 5% Nitric Acid 2% 156 lb/ft³
Applications:
Top-Chem-2000 is re-safe according to API 6FA and ISO 10497 as well as TA-Luft (Clean Air) approval
 
Heavy-duty modified PTFE material manufactured with the addition of silicon carbide to improve the mechanical properties of the PTFE based material. Greatly increased compressible strength and resistance to creep while maintaining excellent chemical resistance. Used in food, pharmaceutical and chemically aggressive applications.      
Chemical applicationsOxygen applicationsPulp & Paper applicationsFood applicationspharmaceutical applicationsheavy industries applications Sheet size60L x 60"W  Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Top-Chem-2003

Resilient at Low Bolt Load PTFE

Top-Chem-2003 gasket  
Compressibility Recovery Creep Relaxation
18% 40% min. NA
Thickness Decrease @Comp. 7251psi
Sealability
@75ºF 9% @480ºF 38% <0.1 ml/hr
Thickness Increase @Comp. 7251psi Density
Sulf.Acid 1% Nitric Acid B 5% 106 lb/ft³
Applications:
Top-Chem-2003 can be used for food, pharmaceutical, and chemically aggressive applications. Top-Chem-2003 has TA-Luft (Clean Air) approval
 
modified PTFE designed for use in low gasket load applications. Glass microspheres aid compressibility and general mechanical strength Developed for use with glass-lined flanges and other situations where compressive load is limited.      
Chemical applicationsOxygen applicationsPulp & Paper applicationsFood applicationspharmaceutical applicationsheavy industries applications Sheet size60L x 60"W  Available thicknesses0.040" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Top-Chem-2006

PTFE for Strong Alkalis

Top-Chem-2006 gasket  
Compressibility Recovery Creep Relaxation
4% 40% min. NA
Thickness Decrease @Comp. 7251psi
Sealability
@75ºF 10% @480ºF 40% <0.1 ml/hr
Thickness Increase @Comp. 7251psi Density
Sulf.Acid NA Nitric Acid 7% 7% 181 lb/ft³
   
Applications:
Top-Chem-2006 has TA-Luft (Clean Air) approval.
 
Top-Chem-2006 is a modified PTFE optimized for use in alkaline applications. The addition of barium sulfate improves mechanical properties of the PTFE and increases operational range of PTFE based materials. Not recommended with strong acids.      
alkalis applicationsOxygen applicationsPulp & Paper applicationsFood applicationspharmaceutical applicationsheavy industries applications Sheet size60L x 60"W    Available thicknesses1/16" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER Soft-Chem

Highly Compressible Expanded PTFE

Soft-Chem gasket  
Compressibility Recovery Creep Relaxation
60% 12% 35%
Thickness Decrease
Vaccum press. Sealability
@572ºF 28.6% 3000 psi <0.002 ml/hr
Thickness Increase Gas leakage Density
@3625ºF 37% 0.12 ml/min. 112 lb/ft³
Applications:
Softest sheet for non-metallic flanges handling chemicals
 
A pure, expanded PTFE material designed for use in low bolt load applications. Offers improved compressive strength and improved creep resistance. Soft-Chem is suitable for use in food and pharmaceutical duties and can be used in glass-lined, plastic and steel flanges.      
Chemical applicationsOxygen applicationsFood applicationspharmaceutical applications Sheet size60L x 60"W  Available thicknesses0.020" - 0.240"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER TC-1003 (CF-504)

PTFE Reinforced with Glass - Ideal for lower bolt load

Robchem CF-504 gasket  
Compressibility Recovery Creep Relaxation
35% 45% 31%
Tensile Strength
Max. Pressure Sealability
1885 psi 1235 psi <0.0025 ml/hr
Min. Temp. Max. Temp. Density
-450ºF 500ºF 87 lbs/ft3
Applications:
Suitable for low bolt load applications. Duro 57 Shore D2
 
High quality, yet cost-effective modiffied PTFE gasket material with glass spheres. A proprietary pressure-sintering and blending process combined with the highest quality raw materials produces a reinforced PTFE sheet that offers superior sealability, excellent torque retention, and reduced creep relaxation.      
Pulp & Paper applicationsPetroleum applicationsaerospace applicationspharmaceutical applicationsheavy industries applications Sheet size60L x 60"W  Available thicknesses0.015" - 0.375"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER TC-1005 (CF-500)

 

PTFE Reinforced with Silica - For strong chemicals

Robchem CF-510 gasket  
Compressibility Recovery Creep Relaxation
7% 45% 31%
Tensile Strength
Max. Pressure Sealability
2320 psi 1235 psi <0.030 ml/hr
Min. Temp. Max. Temp. Density
-450ºF 500ºF 137 lbs/ft3
   
Applications:
Exceptionally effective when the reliability of a low deforming material is required. Duro 61 Shore D2
 
High quality, yet cost-effective modified PTFE gasket material made with silica. A proprietary pressure-sintering and blending process combined with the highest quality raw materials produces a reinforced PTFE sheet that offers superior sealability, excellent torque retention, and reduced creep relaxation.      
Pulp & Paper applicationsPetroleum applicationsaerospace applicationspharmaceutical applicationsheavy industries applications Sheet size60L x 60"W  Available thicknesses0.015" - 0.375"   Material Safety Data Sheet Technical Data Sheet Request Quote  

KLINGER TC-1006 (CF-510)

 

PTFE Reinforced with special process - Strong Caustics

Robchem CF-500 gasket  
Compressibility Recovery Creep Relaxation
6% 40% 13%
Tensile Strength
Max. Pressure Sealability
2320 psi 1235 psi <0.02 ml/hr
Min. Temp. Max. Temp. Density
-450ºF 500ºF 180 lbs/ft3
   
Applications:
Suitable for use in strong caustics & moderate acids. Duro 61 Shore D2
 
High quality, yet cost-effective chemically modified PTFE gasket material that is good to 550°F. A proprietary pressure-sintering and blending process combined with the highest quality raw materials produces a reinforced PTFE sheet that offers superior sealability, excellent torque retention, and reduced creep relaxation.      
Pulp & Paper applicationsPetroleum applicationsaerospace applicationspharmaceutical applicationsheavy industries applications Sheet size60L x 60"W  Available thicknesses0.015" - 0.375"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Sealon

PTFE and Glass - Premium Grade

Sealon gasket  
Compressibility Recovery Creep Relaxation
NA NA NA
Tensile Strength
Max. Pressure Sealability
2500 psi 200 psi NA
Min. Temp. Max. Temp. Specific. Gravity
-450ºF 500ºF 2.24
Applications:
Filled PTFE for general applications
 
This premium grade material is a blend of pure PTFE and glass fiber produced to your size requirements. Provides increased resistance to wear, and deformation under load and low coefficient of thermal expansion.      
water applicationsSteam applicationsgas applications Sheet size48L x 48"W  Available thicknesses1/16" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Virgin PTFE

Shapeable PTFE

Virgin PTFE gasket  
Compressibility Recovery Creep Relaxation
NA 200% NA
Tensile Strength
Max. Pressure Sealability
3000 psi NA NA
Min. Temp. Max. Temp. Specific. Gravity
-400ºF 500ºF 2.16
Applications:
Resistance to strong chemicals and solvents
 
A premium grade material recommended for applications requiring high dielectric strength and resistance to strong chemicals and solvents. Virgin PTFE exhibits the lowest coefficient of friction of all materials. Available in continuous length skived tape.      
caustic applicationswater applicationsSteam applicationsgas applications Sheet size48L x 48"W  Available thicknesses1/32" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Jointex

Shapeable PTFE

Jointex - shapeable PTFE gasket  
Low Temperature
High Temperature
Max. Pressure
7% 50% 20%
   
1/8“ 3/16” 1/4“ 3/8” 1/2“ 5/8” 3/4“ 3/4” 1”
100’ 75’ 50’ 25’ 15’ 15’ 15’ 15’ 15’
1000’ 750’ 500’ 250’ 150’ 150’ 100’ 90’ 75’
Applications:
Easy installation and outstanding chemical resistance
 
Thick tape formed with an adhesive backing for universal installation. O¬ers the unique properties of expanded PTFE to create an effective seal at low bolt loads and conform to flange imperfections. Jointex does not support bacterial growth or cause product contamination: FDA compliant.      
high pressure applicationsChemical applications Sheet size60L x 60"W  Available thicknesses1/32" - 1/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 435F

Red Rubber

435F red rubber gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 180ºF 50% max. 112 lb/ft³
Max. Hardness
Tensile Strength
Elongation
75 Duro NA 100% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% max.
Applications:
Low cost material for basic applications
 
Robco 435 red rubber is an SBR-based fabric-finished, composition rubber sheet. A general purpose plant maintenance material recommended for air, hot or cold water and low pressure saturated steam applications.      
water applicationsozone applicationshydrocarbs applicationsuv applications Roll width36W x 48"W Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 460

Natural Pure Gum Rubber

460 pure gum rubber gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 185ºF 50% max. 66 lb/ft³
Max. Hardness
Tensile Strength
Elongation
40 Duro 2500 psi min. 400% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% max.
Applications:
High resiliency at low temperature
 
Robco 460 Pure Gum, or natural rubber, has superior resistance to tear and abrasion, flexibility at low temperatures, high tensile strength and excellent resiliency. Applications include chute linings, low temperature belting, cemented sleeves, etc.      
water applications Roll width48"W              Available thicknesses1/16" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 464

Black SBR

464 SBR gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 180ºF 80% max. NA
Max. Hardness
Tensile Strength
Elongation
60 Duro 500 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Low cost general purpose
 
Robco 464 is a general purpose SBR sheet with good abrasion resistance, impact strength, resilience and flexibility at low temperatures. Suitable for scrapers, conveyor skirtboards, blast mats and other abrasive applications.      
water applicationsozone applicationsuv applications Roll width48"W              Available thicknesses1/16" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 465

Polychloroprene (Neoprene) - 50 Duro

465 Neoprene gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 200ºF 80% max. 77 lb/ft³
Max. Hardness
Tensile Strength
Elongation
50 Duro 1000 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±15% Max. -50% Max.
Applications:
First choice for moderate applications
 
Good inherent resistance to fungus, flame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.      
Chemical applicationsoil applicationsOxygen applicationswater applicationsSteam applicationshydrocarbs applications Roll width48"W              Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 466

Polychloroprene (Neoprene) - 60 Duro

466 Neoprene gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 200ºF 80% max. 82 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 1000 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
First choice for moderate applications
 
Good inherent resistance to fungus, flame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.      
water applicationsacid applicationsalkalis applicationsozone applications Roll width48"W              Available thicknesses1/32" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 467

Polychloroprene (Neoprene) - 70 Duro

467 Neoprene gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 200ºF 80% max. 82 lb/ft³
Max. Hardness
Tensile Strength
Elongation
70 Duro 1000 psi min. 200% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
First choice for moderate applications
 
Good inherent resistance to fungus, flame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.      
water applicationsacid applicationsalkalis applicationsozone applications Roll width48"W              Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 9370

White Nitrile

9370 nitrile gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 200ºF 50% max. 87 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 1000 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
Meets FDA requirements for common applications
 
Robco 9370 is a powder-free white nitrile that has excellent resistance to petroleum-based hydraulic fluids and good resistance to acids and alkalis. This FDA grade material is recommended for service in pharmaceuticals, food industry and other purity sensitive applications.      
water applicationsacid applicationsalkalis applicationshydrocarbs applicationsFood applicationspharmaceutical applications Roll width48"W              Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 9863

Nitrile

9863 nitrile gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 200ºF 25% max. 72 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 2500 psi min. 350% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
First choice for contact with hydrocarbons
Robco 9863 Nitrile has very good resistance to oil and gasoline; superior resistance to petroleum-based hydraulic fluids; good resistance to hydrocarbon solvents; good resistance to alkalis and acids. Ideal for applications where oil resistance is imperative.    
water applicationsacid applicationsalkalis applicationshydrocarbs applications Roll width48"W              Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote

Robco ENERGIZER™

TFM or PTFE and FRP

EP-60 EPDM gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 300ºF 15% or better 75 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 - 75 Duro - -
ET
NRT
ER & NRR
Elastomer & TFM or PTFE Elastomer & TFM or PTFE no ribs 100% elastomer
Applications:
Plastic, FRP or Steel piping
The Energizer™ utilizes a “no-seam” shield providing the thickest protection on the market. For even more demanding applications, we now offer a TFM® shield. The best Energizer™ for your application. For the finest low torque gasket ever created.    
heavy industries applicationsChemical applicationswater applicationsacid applicationscaustic applicationshydrocarbs applications 0.5" - 36"             Material Safety Data Sheet Technical Data Sheet Request Quote

Robco EP-60

EPDM

EP-60 EPDM gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 250ºF 50% max. 75 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 800 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±10 points Max. ±25% Max. -25% Max.
Applications:
Good acid and weather resistance
Excellent resistance to heat, ozone, sunlight. Good low temperature flexibility; superior resistance to water and steam; good resistance to alkalis, acids and oxygenated solvents. Besides gaskets, applications include any type of weather stripping. Avoid contact with hydrocarbon fluids.    
water applicationsacid applicationsalkalis applicationshydrocarbs applicationsuv applications Roll width36-48"W            Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote

Robco EPP-60

Peroxide-Cured EPDM

EPP-60 EPDM gasket  
Temperature Range
Compression Set
Specific Gravity
-55ºF - 250ºF NA NA
Max. Hardness
Tensile Strength
Elongation
60 Duro 1800 psi min. 400% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Acid resistant
 
Robco EPP-60 peroxide-cured EPDM is an economical alternative to Viton®, PTFE and silicone in certain applications involving chemicals at elevated temperatures.      
water applicationsacid applicationsalkalis applications Roll width36 -48"W           Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SI-60

Grey/Red/White Silicone

SI-60 silicone gasket  
Temperature Range
Compression Set
Specific Gravity
-80ºF - 450ºF 80 ppi 90.5 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 600 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Soft material for high temperature applications
 
Ideal where low bolt load is necessary and high temperature resistance is required. Resistant to moderate chemicals, ozone, UV. Also available in FDA grade material for high temperature food and pharmaceutical applications.      
water applicationsozone applicationsoxidation applicationshydrocarbs applicationsuv applications Roll width36"W           Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco VI-75

Viton®

VI-75 Viton gasket  
Temperature Range
Compression Set
Specific Gravity
-13ºF - 392ºF NA 120 lb/ft³
Max. Hardness
Tensile Strength
Elongation
75 Duro 1200 psi min. 250% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Soft resilient material with high chemical resistance
 
Robco VI-75 Viton is made from 100% Dupont Performance Elastomer FKM polymer. Resistant to all aromatic, aliphatic and halogenated hydrocarbons plus many acids as well as animal and vegetable oils.      
water applicationsozone applicationsoxidation applicationshydrocarbs applicationsuv applications Roll width36"W           Available thicknesses1/32" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 423-SBR-CI

Cloth Inserted

423-SBR-CI gasket  
Temperature Range
Compression Set
Specific Gravity
-20ºF - 180ºF 50% max. 94 lb/ft³
Max. Hardness
Tensile Strength
Elongation
80 Duro 500 psi min. 100% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
General purpose / high tensile
 
Robco 423 CI standard cloth inserted sheet is made from SBR reinforced with polyester fabric. More tear resistant than homogeneous rubber, Robco 423 CI is suitable for low pressure saturated steam, hot or cold water, air and gas applications.      
water applicationsoxidation applicationsuv applications Roll width36 -48"W           Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 2919

Neoprene Coated Polyester

2919 neoprene coated gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - NA 40 - 90 lbs 11 lb/ft³
Max. Hardness
Break. Strength
Elongation
NA 360 - 640 lbs 100% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
For fabrication purposes
 
A very thin, lightweight material used to make protective boots/bellows and protective covers. Robco 2919 makes a far more durable cover than any other type of weather resistant product.      
water applicationsozone applicationsacid applicationsalkalis applications Roll width60"W           Available thicknesses0.020"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 5700

Neoprene & Nylon Diaphram

5700 Neo Nylon gasket  
Temperature Range
Compression Set
Specific Gravity
-31ºF - 212ºF 35% max. 88 lb/ft³
Max. Hardness
Tensile Strength
Elongation
70 Duro 1400 psi min. 250% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±15% Max. -40% Max.
Applications:
Premium diaphragm Material
 
A premium quality sheet made from high grade neoprene reinforced with nylon fabric. Robco 5700 is recommended for use where neoprene's physical and chemical properties in combination with nylon's strength are required.      
water applicationsozone applicationsacid applicationsalkalis applications Roll width54"W           Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 5717

Neoprene & Polyester Diaphragm

5700 neoprene polyester gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 212ºF 35% max. 97 lb/ft³
Max. Hardness
Tensile Strength
Elongation
70 Duro 1400 psi min. 250% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±15% Max. -40% Max.
Applications:
Economical diaphragm
 
Made from high grade neoprene reinforced with polyester fabric. A superior quality diaphragm material with high burst strength and flexibility. Recommended for applications that require the flexibility of polyester and good oil resistance.      
water applicationsozone applicationsacid applicationsalkalis applications Roll width48"W           Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 602

Closed-Cell Neoprene Sponge

602 neoprene sponge gasket  
Temperature Range
Compression Set
Density
-40ºF - 150ºF 25% max. 7-11 lb/ft³
Tear Strength
Tensile Strength
Elongation
14 lb/in 90 psi min. 150% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
±30 points Max. 5psi Min.-9psi Max. 5% Max.
Applications:
For gaskets, stripping, sound and vibration damping
 
Soft density neoprene, closed-cell sponge material for gaskets, weather stripping as well as sound and vibration damping. This product is available in extruded profi les, sheet or strips with or without pressure sensitive adhesive (PSA) backing.      
water applicationsozone applicationsacid applicationsoxidation applicationsalkalis applications Roll width54"W           Available thicknesses1/8" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 1523

General Purpose Open-Cell Sponge

1523 sponge gasket  
Temperature Range
Compression Set
Density
-20ºF - 160ºF 15% max. 26 lb/ft³
Max.Hardness
Tensile Strength
Elongation
45 Duro ±10 NA NA
Heat Aging: CD
Comp. Deflection @25%
Water absortion
±20 5psi Min.-10psi Max. NA
Applications:
Excellent abrasion resistance and compressibility properties
 
A natural open-cell sponge rubber with excellent abrasion resistance, compressibility and good dry sealing properties. Readily absorbs liquids and gases. Available in sheets, strips or die cut parts with or without adhesive backing.      
water applications Roll width48"W           Available thicknesses1/8" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SC-41

Soft Density, Closed-Cell Sponge

CS-41 sponge gasket  
Temperature Range
Compression Set
Density
-20ºF - 180ºF 25% max. 3.5 - 5.0 lb/ft³
Tear Strength
Tensile Strength
Elongation
10 lb/in 50 psi min. 75% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA 2 psi Min. - 5 psi NA
Applications:
Appropriate for automotive, truck and appliance gasketing
 
SC-41 is a PVC/NBR/Neoprene elastomeric sponge with moderate compression-deflection and ne cell structure. Meets required speci cations for automotive, truck and appliance gasketing applications. Available with Pressure Sensitive Adhesives (PSA).      
water applicationsozone applicationsuv applications Roll width54"W           Available thicknesses1/8" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SC-42

Medium density, Closed-Cell Sponge

SC-42 sponge gasket  
Temperature Range
Compression Set
Density
-20ºF - 180ºF 25% max. 6-8 lb/ft³
Tear Strength
Tensile Strength
Elongation
15 lb/in 75 psi min. 100% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA. NA NA
Applications:
For gaskets, stripping, sound and vibration damping
 
SC-42 is a PVC/NBR/Neoprene elastomeric sponge material, ideal for gaskets, weather stripping as well as sound and vibration damping. Available in extruded profi les, sheet or strips with or without pressure sensitive adhesive (PSA) backing.      
water applicationsozone applicationsuv applications Roll width48"W           Available thicknesses1/8" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SC-43

Firm density, Closed-Cell Sponge

SC-43 sponge gasket  
Temperature Range
Compression Set
Density
-40ºF - 200ºF 30% max. 9 lb/ft³
Max Hardness
Tensile Strength
Elongation
60 Duro 71 psi min. 150% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
±30 9psi Min.-13psi Max. 5% Max.
Applications:
For gaskets, stripping, sound and vibration damping
 
SC-43 is a PVC/NBR/Neoprene elastomeric sponge material, suitable for gaskets, weather stripping as well as sound and vibration damping. Available in extruded pro les, sheet or strips with or without pressure sensitive adhesive (PSA) backing.      
water applicationsozone applicationsuv applications Sheet size72L x 42"W  Available thicknesses1/8" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco White Silicone

Stability at high temperatures

White silicone gasket  
Temperature Range
Compression Set
Density
-67ºF - 450ºF 25% max. 29-31 lb/ft³
Max Hardness
Tensile Strength
Elongation
NA 100 psi min. 150-200% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA 6psi Min.-14psi Max. 3-5% Max.
Applications:
Pro le extrusions, sheeting, jointed rings, punched forms
 
Premium quality material used where highly compressible gaskets are required at temperatures up to 450ºF. The cellular structure is produced without the use of CFCs resulting in less damage to the environment.      
water applicationsozone applicationsoxidation applicationsuv applicationshydrocarbs applications Roll width36"W  Available thicknesses1/16" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Microcellular Urethane

Superior Foam/Sponge

Microcellular Urethane gasket  
Temperature Range
Compression Set
Density
-40ºF - 158ºF 2% max. 17 lb/ft³
Max Hardness
Tensile Strength
Elongation
7 Duro 50 psi min. 80%
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA NA NA
Applications:
Perfect choice for vibration & impact damping
 
Off¬ers enhanced recovery over other types of foam and sponge, resulting in a superior seal, particularly in low seat stress applications. This material exhibits resistance to UV exposure, ozone and is environmentally safe and clean. An excellent choice for seals, gaskets and spacers used in electronic equipment.      
water applicationsozone applicationsoxidation applicationsuv applicationshydrocarbs applications Roll width54"W           Available thicknesses1/32" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 100N

Neoprene and Cork

100N neoprene cork gasket  
Compression Set Recovery
Density
60% max. 75% min. 7-11 lb/ft³
Max Hardness
Tensile Strength
Flexibility
70 Duro 250 psi 2 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 10% ASTM Fuel A 15% 35%
Applications:
#1 choice for transformers
 
An extremely durable medium grade neoprene and cork material with superior tensile and tear strength; highly oil resistant. Ideal for transformer sealing applications.      
oil applicationsheavy industries applications Sheet size36L x 36"W  Available thicknesses1/8" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco E-30

Most Economical Cork Gasket

E-30 cork gasket  
Compression Set Recovery
Density
60% max. 95% min. 33 lb/ft³
Max Hardness
Tensile Strength
Flexibility
65 Duro 150 psi 3 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 10% ASTM Fuel A NA 50%
Applications:
Most economical cork gasket
 
E-30 is an economical neoprene and cork material. Suitable for sealing at low bolting pressures in a wide variety of applications.      
heavy industries applications Sheet size36L x 36"W  Available thicknesses1/32" - 1/4   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco E-40

Neoprene and Cork

E-40 neoprene cork gasket  
Compression Set Recovery
Density
60% max. 80% min. 44 lb/ft³
Max Hardness
Tensile Strength
Flexibility
75 Duro 250 psi 3 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 20% ASTM Fuel A 15% 35%
Applications:
For oil sealing, transmissions and automotive gaskets
 
E-40 is an excellent medium grade neoprene and cork material used for oil and transmission seals and automotive gaskets. A high-quality material with medium compressibility and oil resistance.      
oil applications Sheet size36L x 36"W  Available thicknesses1/32" - 1/4   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco E-50

General purpose Neoprene and Cork

E-50 neoprene cork gasket  
Compression Set Recovery
Density
55% max. 75% min. 46 lb/ft³
Max Hardness
Tensile Strength
Flexibility
70 Duro 250 psi 3 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 20% ASTM Fuel A 15% 25%
Applications:
General purpose
 
Firm grade neoprene and cork with high tensile strength and tear resistance and low compression set. E-50 has excellent heat resistance and moderate swelling in oils and fuels. Also suitable for high bolting pressure.      
oil applicationsPetroleum applications Sheet size36L x 36"W  Available thicknesses1/16" - 1/4   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco E-70

Co-Polymer and Cork

E-70 copolymer cork gasket  
Compression Set Recovery
Density
60% max. 75% min. 43 lb/ft³
Max Hardness
Tensile Strength
Flexibility
70 Duro 200 psi 1 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 10% ASTM Fuel A 10% 45%
Applications:
Used in transformers and most industrial applications
 
An economical sealing material, E-70 is a soft grade co-polymer and cork material with moderate resistance to fuels. Commonly used in transformers and automotive and industrial applications.      
oil applications Sheet size36L x 36"W  Available thicknesses1/16" - 3/8"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco FKS

Beater Add Gasket Sheet

FKS beater ad gasket  
Compression Set Recovery
Density
33% max. 38% min. 40 lb/ft³
Max Temp.
Tensile Strength
Creep Relax.
300ºF 1241 psi NA
Thickness Increase after immersion
ASTM Oil IRM 18% ASTM Fuel B 18% Water 17%
Applications:
Low pressure, Fuel and oil resistance
 
Made from cellulose fiber and fine grain cork with an SBR binder. FKS is extremely compressible, conforming well to rough surfaces. Recommended for use in water and oil applications.      
oil applicationsheavy industries applications Roll width43"W           Available thicknesses1/32" - 1/16"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco GRC-36

Economy Grade

GRC-39 economy gasket  
Compression Set Recovery
Density
70% max. 80% min. 30 lb/ft³
Max Hardness
Tensile Strength
Flexibility.
60 Duro 140 psi min. 1 Max (factor)
Thickness Increase after immersion Max. Comp. @ 400psi
ASTM Oil IRM 10% ASTM Fuel B 10% 55%
Applications:
Ideal for the automotive aftermarket
 
An economical grade cork co-polymer with medium fuel and oil resistance and medium compressibility. Ideal for the automotive aftermarket.      
oil applicationsPetroleum applications Roll width42"W           Available thicknesses1/32" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco H-35

Nitrile and Cork - Roll

H-35 nitrile cork gasket  
Compression Set Recovery
Density
80% max. 80% min. 33 lb/ft³
  Flexibility
60 Duro 250 psi 3 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 10% ASTM Fuel A 10% 45%
Applications:
Resistance to oil, fuels and solvents
 
Top quality nitrile and cork material that is highly compressible with good sealing capability at low bolting pressure. Resistant to oil, aromatic fuel and solvent.      
oil applicationsPetroleum applications Roll width42"W           Available thicknesses1/32" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco H-45

Nitrile and Cork - Sheet

H-45 nitrile cork gasket  
Compression Set Recovery
Density
80% max. 75% min. 8 lb/ft³
Max Hardness
Tensile Strength
Flexibility
65 Duro 250 psi 3 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 10% ASTM Fuel A 15% 35%
Applications:
High resistance to oil, fuels and solvents
 
Top quality nitrile and cork material that is compressible with good sealing capability at low bolting pressure. Highly resistant to oil, aromatic fuel and solvent.      
oil applicationsPetroleum applications Sheet size36L x 36"W  Available thicknesses1/32" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco H-55

Nitrile and Cork

H-55 nitrile cork gasket  
Compression Set Recovery
Density
55% max. 75% min. 46 lb/ft³
Max Hardness
Tensile Strength
Flexibility
80 Duro 250 psi 3 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 1 10% ASTM Fuel A 10% 25%
Applications:
Perfect for high bolting pressure seals
 
A nitrile and cork material with high tensile and tear strength. Perfect for high bolting pressure seals including those recommended for automotive, fuel pumps, meters and general industrial applications.      
oil applicationsPetroleum applications Sheet size36L x 36"W  Available thicknesses1/32" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco N104

Economical Cork Sheet

N104 cork sheet  
Max. Temp.
Recovery
Density
250ºF 80% min. 13.7 lb/ft³
Max Hardness
Tensile Strength
Flexibility
NA 75 psi min. 5 Max (factor)
Thickness Increase after immersion
Max. Comp. @ 100psi
NA NA 40%
Applications:
Economical cork sheet for non-gasket applications
 
Bonded cork sheet recommended as a lining and facing material, for sporting goods, bulletin boards and die cut parts.      
  Roll width48"W           Available thicknesses1/32" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Hydroil

Vegetable Fiber Sheet

Hydroil Vegetable fiber gasket  
Max. Temp.t Max. Pressure
Density
250ºF 2000 psi NA
Thickness Increase after immersion Max. Comp.
ASTM Oil 3 5% ASTM Fuel B 5% 40%
Weight Increase after immersion
Max. Comp. @ 400psi
ASTM Oil 3 15% ASTM Fuel B 15% 15%
Applications:
Low cost gasket material.
 
Hydroil provides fair sealability, good conformability and good resistance to petroleum oils, fuel oils and many organic solvents. This cellulose fi ber gasket material with a protein and glycerin binder is an low-cost light duty, general purpose gasket material. Not intended for sealing water where exposure to drying exists.      
oil applicationsPetroleum applicationsheavy industries applications

Roll width36"W

Available thicknesses0.01" - 1/8"

  Material Safety Data Sheet Technical Data Sheet Request Quote  

Boiler Gaskets

Handhole and manhole gaskets

boiler gaskets      
Robco provides various types of gaskets for boilers, heaters and other high temperature and/or high pressure vessels.      
      Contact us for details   Request Quote  

Rubber Mats

Mats for Industrial, Commercial, Food
Service, Static and Electrical Applications

Rubber mats      
Our rubber sheeting can be cut and manufactured as floor and surface matting specific to your application with machined groves, holes, patterns, etc. per your specifications.      
      Contact us for details   Request Quote  

Small Parts

Grommets, O-Rings, Washers

Small rubber parts      
We manufacture small rubber parts such as grommets, o-rings, washers, spacers, stoppers and plugs to suit your needs.      
      Contact us for details   Request Quote  

Tubing

Sleeves, Cords, Strips, Pro les and more...

Tubing      
Tubing, cord and profile parts can be ordered from our wide range of specialized rubber materials such as EPDM, Viton, NBR, Nitrile, Neoprene and so much more...      
      Contact us for details   Request Quote  
 

ALLPAX Gasket Cutting Tools

Robco is an official ALLPAX distributor.

   

- Extension-Style Gasket Cutters

- Rotary-Style Gasket Cutters

- Punches and Hammers

 

See their VIDEO here

 

Allpax is the largest global manufacturer of gasket cutters, punches, and related accessories used in the fabrication of custom flange gaskets.

     
ALLPAX Catalog     Contact us for details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.