Robco is a trusted fabricator and distributor of SCAN-PAC Friction & Phenolic Materials

Offering a broad diversity of friction products, phenolics and laminates. that can be molded or machined into any dimensional configuration. Having pioneered the development of Non-Asbestos friction material, Scan-Pac created hundreds of base compounds, variations of which are available as solutions to your specific applications problems.

 

Scroll down to browse our friction materials or select from the categories below:


FRICTION MATERIALS / BRAKE LININGS

We provide brake linings and pads as per your drawings and specifications.

SCAN-PAC Gemini GM Gemini GH RF 34
  RF 36 RF 38 RF 41
  RF 42 RF 51 CGA-Cured
  CGA-Uncured GGW  

 

Gemini GMF

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.34 / Hot: 0.32 7500 fpm
Wear Rate (SAE J661)
Friction Code
0.004 inch³/hp-hr max. EE
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
 
 
GM is a rigid molded non-asbestos, metallic friction material suitable for use in medium friction brake/clutch applications in a wide variety of equipment. It has exceptional dimensional stability and can be molded into a wide range of shapes and sizes      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

Gemini GH

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.59 / Hot: 0.56 7500 fpm
Wear Rate (SAE J661)
Friction Code
0.006 inch³/hp-hr max. HH
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
GH is a rigid molded non-asbestos, metallic friction material suitable for use in high friction brake/clutch applications in a wide variety of equipment. It has exceptional dimensional stability and can be molded into a wide range of shapes and sizes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

RF 34

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.34 / Hot: 0.34 10000 fpm
Wear Rate (SAE J661)
Friction Code
0.0057 inch³/hp-hr max. EE
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
RF 34 is a rigid molded non-asbestos, metallic friction material suitable for use in medium friction brake/clutch applications in a wide variety of equipment. It is non-corrosive, smooth, kind to mating surfaces and keeps the interface temperatures down; it can be molded into a wide range of shapes and sizes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

RF 36

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.42 / Hot: 0.40 10000 fpm
Wear Rate (SAE J661)
Friction Code
0.003 inch³/hp-hr max. FF
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
RF 36 is a rigid molded non-asbestos friction material suitable for use in medium friction brake/clutch applications in a wide variety of equipment such as agricultural equipment, overhead cranes and heavy duty equipment. It is non-corrosive, non-abrasive, smooth, quiet and kind to mating surface; it can be molded into wide range of shapes and sizes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

RF 38

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.44 / Hot: 0.40 10000 fpm
Wear Rate (SAE J661)
Friction Code
0.005 inch³/hp-hr max. FF
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
RF 38 is a rigid molded non-asbestos, metallic friction material suitable for use in Medium friction brake/clutch applications in a wide variety of equipments such as agricultural equipment, overhead cranes and heavy duty equipment. It is non-corrosive, non-abrasive and kind to mating surface; it can be molded into many intricate internal, external, and customer specified shapes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

RF 41

Rigid Molded

   
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.46 / Hot: 0.45  7500 fpm
Wear Rate (SAE J661)
Friction Code
0.0097 inch³/hp-hr max.  FF
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
RF 41 is a rigid molded non-asbestos metallic friction material suitable for use in medium friction brake/clutch applications in a wide variety of equipment. It performs very well in high temperature applications and can be used in dry or wet applications; it can be molded into wide range of shapes and sizes to satisfy virtually all industrial applications.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

RF 42

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
 Normal: 0.43 / Hot: 0.41 10000 fpm
Wear Rate (SAE J661)
Friction Code
0.007 inch³/hp-hr max. FF
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
RF 42 is a rigid molded non-asbestos, non-metallic friction material suitable for use in medium friction brake/clutch applications in a wide variety of equipment including the most severe. It is recommended for virtually any medium friction application where metal can not be used; it can be molded into wide range of shapes and sizes to satisfy virtually all industrial applications.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

RF 51

Rigid Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.51 / Hot: 0.49 10000 fpm
Wear Rate (SAE J661)
Friction Code
 0.004 inch³/hp-hr max.  GG
Drum Temperature for Constant Operation
Pressure
650°F 2000 psi
 
RF 51 is a rigid molded non-asbestos friction material suitable for use in high friction brake/clutch applications. It is non-corrosive, non-abrasive, smooth, and kind to mating surface. It exhibits excellent fade and recovery characteristics; it can be molded into many intricate internal, external, and customer specified shapes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

GGA-Cured

Flexible Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
Normal: 0.48 / Hot: 0.46 5000 fpm
Wear Rate (SAE J661)
Friction Code
 0.011 inch³/hp-hr max.  GG
Drum Temperature for Constant Operation
Pressure
500°F 100 psi
 
Green Gripper Aramid-cured is a flexible molded, high aramid content sheeter lining in the medium to high friction range offering smoothness and long wear. Compounded for demanding tensioning unit applications, GGA has also proved to be the finest high aramid material available for wet or dry use on clutches and brakes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote  

GGA-Uncured

Green Gripper Aramid Uncured

Flexible Molded

 
Coefficient of Friction (SAE J661)
Rubbing Speed
 Normal: 0.45 / Hot: 0.36  5000 fpm
Wear Rate (SAE J661)
Friction Code
0.008 inch³/hp-hr max.  FF
Drum Temperature for Constant Operation
Pressure
500°F 100 psi
 
Green Gripper Aramid-uncured is a flexible molded, high aramid content sheeter lining in the medium to high friction range offering smoothness and long wear. Compounded for demanding tensioning unit applications, GGA      
      Material Safety Data Sheet Technical Data Sheet Request Quote  

GGW

Green Gripper Woven

Rigid

 
Coefficient of Friction (SAE J661)
Rubbing Speed
 Normal: 0.50 / Hot: 0.46 5000 fpm
Wear Rate (SAE J661)
Friction Code
 0.005 inch³/hp-hr max.  GG
Drum Temperature for Constant Operation
Pressure
550°F 200 psi
 
Green Gripper Woven is a Non-Asbestos woven product for heavy-duty industrial applications. Recovery is immediate and complete. GGW exhibits high friction under a wide range of temperatures. GGW can be used on wet dry band brakes for industrial use where medium to high friction is required. The product is available in roll form, flat sheet, and custom shapes.      
    Material Safety Data Sheet Technical Data Sheet Request Quote