Robco delivers a niche line of greases, oils and fluids that extend MTBF in the toughest industrial applications. A trusted distributor of Asbury, Royal Purple and Saf-T-Eze products, Robco also develops all-purpose lubricants such as the dependable and incredibly versatile Robco EP-1004 and high performance diamond drill rod greases - DDR and Bio-DDR ... to name a few.

Ask a representative about the many testimonials of our lubricants withstanding extreme conditions resulting in maximized operational efficiency and reduced costs related to unscheduled maintenance and downtime.

 

Scroll down to browse our gasketing material and rubber styles or select from the categories below:


LUBRICANTS & GREASES

Robco manufactures trusted lubricants and greases for various applications.

ROBCO BG-7060 BG-8118 Bio-DDR
  DDR-1063 EP/MP-1004 FDA WRL-400 Semi-Synlub
  FRD-2200 HT Sock Grease RCG-1255
  SBL-1000 WRD-4481 WRD-OG Lube

ROYAL PURPLE

In addition to Robco lube and grease solutions, Robco is a trusted distributor of Royal Purple renowned products.

Royal Purple Barrier Fluid FDA Barrier Fluid GT Coupling Grease
  Max-Chain Max-Gear Max-Tuff
  Maxfilm Open Gear Guard XP Paper Mill Grease
  Poly-Guard FD Royal Flush Syndraulic
  Synfilm Synfilm GT Synfilm Recip
  Escalator Chain Lube Marine Hydraulic Oil Thermyl-Glyde
  Thermyl-Tuff Thermyl-Glyde WGO UPG Ultra Performance
  VP Preservative Oil Wire Rope Lubricant Air Hammer Oil
  BioMax Stern Tube EAL    

ASBURY

Robco is a trusted distributor of Asbury high-quality graphite products.

Asbury Slip-Plate Graphite Aerosol Graphite Wax Stick  
  Graphokote 410-S Graphokote 495  
  Hybake Supreme Oven Chain Lubricant. Hyheet Graphite Grease  
  Microfyne Extra Finely Powdered No.1 Large Flakes Graphite Powder No.2 Medium Flakes Graphite Powder
  No.205 Powdered Amorphous Graphite No.635 Finely Powdered graphite Railroad 460 Switchplate Lubricant
  Railroad 470 Switchplate Lubricant Regular Oven Chain Lubricant  

SAF-T-EZE

Robco distributes Saf-T-Eze products.

SAF-T-EZE Belt-Dress Contact Clean Dry-Moly
  FDA Anti-Seize Gasket-Off Industrial Pipe Sealant TPS
  Instant Bonder - IB Series Moly Grade Anti-Seize Nickel Grade Anti-Seize
  Nuclear Grade Pen-Oil Pipe Sealant
  Pure Copper Grade Anti-Seize Regular Grade Anti-Seize RTV Silicone 732 Red Hi Temp Sealant
  Silicone Lube FDA Grade Structural Adhesive SA-5 T-Gel Lube

OTHER

ROBCO Silicone Break-In Lubricant 490 Neoprene Ciment  

         

Robco EP/MP-1004

The #1 EP/MP grease in the industry to protect from water-washout.

EP/1004 Multiple purpose Lubricant  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
0 - 2 220 17.8
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Green 280 - 370 318ºC
Applications:
Applications: steel mills, mobile equipment in construction and mining, paper mill wet ends, bearings, crushers, loaders, bucket pins and more.
 

Where water-washout under extreme shock loads or high temperature is causing you trouble, EP/MP-1004 is THE solution: it stays on to provide a tough lubricating film that keeps equipment running smoothly in extreme conditions.  (Calcium Sulfonate Complex)

     
high pressure applicationshigh temperature applicationswater applicationsCorrosion applicationsBearing applicationsGear applications Available in tubeAvailable in pailAvailable in kegAvailable in drumAvailable in tote   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Bio-DDR

Biodegradable Diamond Drill Rod Grease

Bio-DDR  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
3 42.7 9.1
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Green 220 - 250 163ºC
Applications:
Applications: diamond drill rods, pneumatic and percussion
tools.
 

Bio-DDR non-toxic, biodegradable lubricant for diamond drill rods is specially formulated to offer optimal performance with minimal environmental impact at a reasonable cost.

     
Biodegradablehigh temperature applicationswater applicationsCorrosion applications Available in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco DDR-1063

High Performance Diamond Drill Rod Grease with low washout

DDR-1063  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
3 232 20
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Tan 240 250ºC
Applications:
Applications: diamond drill rods and wet conditions.
 

DDR-1063 new generation diamond drill rod grease with a modified complex of overbased sulfonates, offers exceptional mechanical stability. It will not liquefy or soften up to 500°F; it is water resistant and does not rub off the rod while drilling. Easy to spread on drilling rods in any environment, hot or cold.

     
high temperature applicationswater applicationsCorrosion applications Available in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SLB-1000

High Temperature Graphite Lubricant

SBL-1000  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- - 200 - 230
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Dark 240 382ºC
Applications:
Applications: roller chains, kiln car wheels, slides and castings in contact with side bars under high temperature conditions.
 

Robco SBL-1000 high temperature lubricant contains high viscosity oil, graphite, molybdenum disulfide and a high ash carrier to transfer solid ingredients into very close tolerances. SBL-1000 will not burn or smoke and has excellent shelf life due to an extremely fine-particle solid suspension.

     
high temperature applicationsCorrosion applicationsGear applications Available in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco RCG-1255

Rail Curve Grease

RCG-1255  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
1 23 -
Colour
Consistency ASTM D-21
Drop Point ASTM D-2265
Black 325 180ºC
Applications:
Applications: track side lubrication.
 

A year round trackside rail curve grease. It is formulated using a low viscosity mineral oil to provide year round pumpability. It spreads well along even the longest curves and provides superior load carrying and anti-wear properties to protect all components of the rail-wheel interface.

     
Low temperature applicationshigh temperature applicationsCorrosion applicationsBearing applications Available in drumAvailable in tote   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco WRD-4481

Wire Rope Dressing

WRD-4481  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 1400 90
Colour
Penetration ASTM D-21
Flash Point ASTM D-2265
Grey - 220ºC
Applications:
Applications: mine hoist rope, crane and marine cables.
 

Robco WRD-4481 is a state-of-the-art, high performance
semi-fluid, non-soap wire rope dressing that rapidly
penetrates to the core and will not flying off during operation.

     
water applicationsCorrosion applicationsGear applications Available in pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco WRD-OG Lube

Wire Rope Dressing

WRD-OG  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- - 375 - 425
Colour
Penetration ASTM D-21
Flash Point ASTM D-2265
Grey - 227ºC
Applications:
Applications: highly effective wire rope fi eld dressing and an efficient open gear lubricant.
 

Robco WRD-OG Lube is a high performance asphaltic-based lubricant that ensures excellent protection against wear and corrosion.

     
water applicationsCorrosion applicationsGear applications Available in pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco FDA WRL-400 Semi-Synlub

FDA Wire Rope Lubricant

FDA-WRL-400  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 370 25
Colour
Penetration ASTM D-21
Flash Point ASTM D-2265
Trans. - 202ºC
Applications:
Applications: chains, wire ropes, linkages, cams, helical gearboxes, and anywhere a food grade lubricant is required.
 

A premium food processing machinery lubricant (NSF H-1 A) fully formulated with extra tackiness additives and waterproof oils that resist heavy water wash down.

     
water applicationsCorrosion applicationsGear applicationsFood applications Available in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco FRD-2200

Friction Rope Dressing

FRD-2200  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
S75 - 81
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Amber - 140ºC
Applications:
Applications: locked coil ropes used on friction winders (Koepe hoists).
 

Robco FRD-2200 lubricant provides extreme water resistance, good corrosion protection and its dry film provides a chemical barrier against acidic and alkaline environments.

     
water applicationsCorrosion applications Available in pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco BG-7060

Brick Grease

Brick Grease  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
8+ 450 - 550 55 - 65
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Brown 18 - 22 182ºC
Applications:
Applications: paper mill dryers, ball mills in mining crusher applications, Babbitt bearings and trunnion bearings.
 

Robco BG-7060 sodium based grease can be used to replace conventional brick grease. effective where medium to high temperature is a factor.

     
high temperature applicationsCorrosion applicationsBearing applications Available in box   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco BG-8118

Brick Grease

Brick Grease  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
6 450 - 550 55 - 65
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Brown 18 - 22 182ºC
Applications:
Applications: paper mill dryers, ball mills in mining crusher applications, Babbitt bearings and trunnion bearings.
 

Robco BG-8118 lithium brick grease can be used to replace conventional brick grease. effective where medium to high temperature is a factor.

     
high temperature applicationsCorrosion applicationsBearing applications Available in box   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Sock Grease

HT Sock Grease

FDA-WRL-400  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
4.5 220 - 230 17 - 19
Colour
Penetration ASTM D-21
Drop Point ASTM D-2265
Light Brown 160 - 190 196ºC
Applications:
Applications: paper mill dryers, ball mills in mining applications and trunnion bearings.
 

Robco HT sock grease is a high quality lithium-OH stearate grease inserted in a woven sleeve. It is specially formulated to work in high temperature applications where conventional brick grease is used.

   
high temperature applicationsCorrosion applicationsBearing applications Available in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Barrier Fluid FDA

For Mechanical Seals

Barrier Fluid  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
22 - 910 5.2 - 65.5 1.75 - 9.9
Colour
Flash Point D-92
Pour Point D-6892
Clear 330 - 530ºF -70 - -65ºF
Applications:
Applications: Pure, non-reactive, synthetic fluid that provides superior lubrication and cooling for double and tandem mechanical seals.
 

Barrier Fluid FDA® provides very stable seal performance over an extremely wide temperature range, satisfying most seal service requirements. Barrier Fluid FDA® is extremely clean and has excellent low temperature fluidity and heat transfer properties.

     
Low temperature applicationshigh temperature applicationsFood applicationswater applicationsCorrosion applications Available in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Air Hammer Oil

Tool Lubrication

Barrier Fluid  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
46 - 150 46 - 150 7.2 - 15.9
Colour
Flash Point D-92
Pour Point D-92
Purple - 350ºF - 415ºF
Applications:
Applications: Air hammers, Rock drills.
 

Air Hammer Oil is an ultra-tough, para-synthetic rock drill / air hammer oil designed to increase the life of your tools. It is noncorrosive to both ferrous and nonferrous metals.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications Available in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Barrier Fluid GT

For Mechanical Seals

Barrier Fluid  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
22 - 910 5.2 - 65.5 1.75 - 9.9
Colour
Flash Point D-92
Pour Point D-6892
Purple 330 - 530ºF -70 - -65ºF
Applications:
Pure, non-reactive, synthetic fluid that provides superior lubrication and cooling for double and tandem mechanical seals.
   

Barrier Fluid GT® is recommended for use at elevated temperatures where nitrogen purge is not an option and when FDA purity is not required.

     
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications Available in 5gal purple pailAvailable in keg   Material Safety Data Sheet Technical Data Sheet Request Quote    

Royal Purple Coupling Grease

Synthetic Coupling Grease

Coupling Grease  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
0 2995 112
Colour
Penetration Test
Drop Point ASTM D-2265
Purple 335-385 392ºF
Applications:
Provides superior resistance to oil separation from the high centrifugal forces generated by couplings.
 

Royal Purple Coupling Grease is a lithium complex, high film strength grease formulated with high viscosity synthetic oils and tacky, synthetic polymers, plus Royal Purple’s proprietary Synslide additive technology

   
high temperature applicationshigh pressure applicationswater applicationsCorrosion applications Available in pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

RP Escalator Chain Lube

Synthetic Coupling Grease

Barrier Fluid  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
4.5 657 34.8
Colour
Penetration D-217
DropPoint D-92
Purple 355 - 385 440ºF
Applications:
Provides superior resistance to oil separation from the high centrifugal forces generated by couplings.
 

Royal Purple Coupling Grease is a lithium complex, high film strength grease formulated with high viscosity synthetic oils and tacky, synthetic polymers, plus Royal Purple’s proprietary Synslide additive technology

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsGear applications Available in 5gal purple pailAvailable in keg   Material Safety Data Sheet Technical Data Sheet Request Quote  

RP Marine Hydraulic Oil

Biodegradable hydraulic oil

 

Barrier Fluid  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
15 - 150 15 - 150 3.3 - 15.4
Colour
Penetration D-21
Drop Point D-92
Purple 220 - 250 380 - 555ºF
Applications:
The components of Marine Hydraulic Oil™ are TSCA listed and meet EPA, RCRA and OSHA requirements. Biodegradable, meets the U.S. Fish and Wildlife Department’s toxicity requirements.
 

Royal Purpleʼs Marine Hydraulic Oil™ is an inherently biodegradable, flashless, environmentally responsible, high performance hydraulic oil, formulated for those users that need a high performance oil to protect their equipment yet are concerned about the environment.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications Available in 5gal purple pailAvailable in keg   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Max-Chain®

Dry film / EP Lubricant for chains, open gears & sliding surfaces

Barrier Fluid  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
4.5 657 (3.8 w/diluent) 34.8 (1.4 w/diluent)
Colour
Density
Flash Point ASTM D-92
Purple 6.87 lbs/g 205ºF
Applications:
Max-Chain is recommended for chains and open gears operating in dusty environments.
 

Max-Chain is an advanced, synthetic lubricant that dramatically reduces wear and extends equipment life. It provides excellent protection against rust and corrosion. It works equally well in wet, acidic environments and dusty environments.

   
Low temperature applicationshigh pressure applicationswater applicationsCorrosion applications Available in tubeAvailable in 5gal purple pailAvailable in keg   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Max-Gear®

High Performance Gear Oil

Max Gear  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
75W - 90W 111 - 284 16.9 - 26.8
Colour
Density
Flash Point ASTM D-92
Purple 7.5 lbs/g 350 - 375ºF
Applications:
For use in truck, motor home / RV, and automotive front or rear differentials, manual transmissions, and lower gear units of marine engines that specify use of an API GL-5 or GL-4 fluid.
 

Max-Gear is an ultra-tough automotive gear oil. It’s designed to maximize power and provide unsurpassed protection to heavily loaded gears. It makes gears run smoother, quieter, cooler and longer without overhauls.

   
Low temperature applicationshigh temperature applicationsCorrosion applicationsCompatible with other oils Available in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Max-Tuff®

Assembly Lubricant

Max Tuff  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 650 47.8
Colour
Density
Flash Point ASTM D-92
purple 7.39 lbs/g 300ºF
Applications:
Designed for use in reassembling repaired equipment.
 

Max-Tuff utilizes durable synthetic molecules that adhere to metal surfaces and create an extremely strong barrier between surfaces. This minimizes the possibility of metal-to-metal contact while providing excellent protection against rust and corrosion to both ferrous and nonferrous metals.

   
metal to metal applications Available in 5gal purple pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Max-Film®

Multi-purpose Aerosol Lubricant / Penetrant / Preservative

Max Film  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 224.9 (5.6 w/diluent)

17.5 (1.8 w/diluent)

Colour
Density
Flash Point ASTM D-92
Purple 7.93 lbs/g 215ºF
Applications:
Loosening stuck parts. Lubricating power tools, hinges, chains, rollers, open gears, fishing tackle, lawn equipment and more. Preserving and protecting parts in storage against rust and corrosion. Acting as a manual cutting fluid for easier hand drilling, tapping, metal cutting, etc.
 

Maxfilm is a multipurpose, synthetic lubricant that excels in many applications. It deeply penetrates, cleans and loosens rusted parts. Maxfilm leaves an exceptionally tough and durable lubricating film for improved operation and long-lasting protection against wear, rust and corrosion

   
Low temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils Available in tubeAvailable in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple BioMax Stern Tube EAL

For marine applications

Open Guard  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 1C00 - 150 15.2 - 20.6
Colour
Density 15ºC
Flash Point ASTM D-92
Purple 0.878 - 0.894 267-512ºF
Applications:
Provides excellent seals compatibility in preventing leakage, protection for bearings, propeller shaft and stern tube systems at varying operating temperature conditions.
 

Royal Purple’s BioMax Stern Tube Oil is an environmentally acceptable, synthetic, high performance lubricant formulated for stern tube lubrications in marine applications.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications BiodegradableAvailable in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Open Gear Guard XP

Dry Film / EP Lubricant

Open Guard  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 3.5 1.4
Colour
Density
Flash Point ASTM D-92
Purple 6.77 lbs/g 205ºF
Applications:
Designed to effectively lubricate open gears and chains subjected to heavy loads in dusty or dirty environments.
 

Open Gear Guard XP has excellent EP properties due to its formulation with Royal Purple’s proprietary Synslide® additive technology and can effectively lubricate at temperatures up to 400° F.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils Gears applicationsAvailable in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Paper Mill Grease

Synthetic Pulp and Paper Grease

Paper Mill  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
1.5 244 24
Colour
Penetration ASTM D-21
Drop Point ASTM D-566
Purple 300 (16x)-275 (10000x) 536ºF
Applications:
Highly recommended on wet end roll bearings, wire return rolls, couch rolls, suction press rolls, granite or synthetic covered press rolls and wet felt rolls, as well as dryer felt rolls, coater rolls, calendar rolls, winder rolls and super calendar rolls.
 

Royal Purple® Paper Mill Grease is a high performance, aluminum complex, synthetic grease designed to lubricate a wide range of typical paper / pulp processing applications using a single grease

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications Pulp and Paper applicationsAvailable in pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Poly-Guard® FDA

High Performance NSF/USDA H-1 Oil

Poly Guard  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
32 - 460 32 - 460 6.1 - 39
Colour
Density
Flash Point ASTM D-92
Clear 6.94 - 7.24 lbs/g 410 - 450ºF
Applications:
Recommended for use in compressors, pumps, gear boxes, bearings, hydraulic systems, blowers or almost any other equipment in food processing or pharmaceutical plants requiring oil.
 

Poly-Guard® FDA is formulated with Royal Purple’s proprietary Purolec® additive technology, which is proven to reduce wear and to keep equipment cleaner, allowing for substantially longer oil drain intervals.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils
Food applicationsPharmaceutical applicationsAvailable in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Royal Flush

Oil Circulation System Cleaner

Royal Flush  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
46 46 6.3
Colour
Density
Flash Point ASTM D-92
Purple 7.89 lbs/g 470ºF
Applications:
Safe and Effective Flushing and Cleaning Fluid for Dirty Oil Circulating Systems and Reservoirs.
 

Royal Purple’s Royal Flush is a safe, effective and inexpensive product for cleaning sludge and varnish from equipment while in service.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications Available in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Syndraulic®

High Performance Hydraulic Oil

Syndraulic  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
10 - 150 10 - 150 2.0 - 14.8
Colour
Density
Flash Point ASTM D-92
Purple 6.94 - 7.48 lbs/g 380 - 450ºF
Applications:
Increases both the life of the oil and the seals, filters and pumps of hydraulic systems.
 

Syndraulic® is a clean, long life, energy efficient, minimum leak, hydraulic oil possessing exceptional film strength and wear protection properties. It can lower operating temperatures and restore normal operation to erratically operating hydraulic systems.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applicationsBiodegradable Available in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Synfilm®

Air Compressor and Industrial Oil

Synfilm  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
32 - 150 32 - 150 5.8 - 16.5
Colour
Density
Flash Point ASTM D-92
Purple 7.12 - 7.9 lbs/g 430 - 450ºF
Applications:
Recommended for use in air compressors, pumps, steam turbines, bearings, gears, air tools, etc.
 

RobSynfilm® is a clean, dry, long life, high film strength, energy efficient, synthetic lubricant that significantly increases bearing life and equipment reliability.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils Available in 5gal purple pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Synfilm® GT

Multi-Purpose Industrial Oil

Synfilm  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
10 -680 10 - 680 2.0 - 47.9
Colour
Density
Flash Point ASTM D-92
Purple 6.9 - 7.38 lbs/g 355 - 455ºF
Applications:
Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc.
 

Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils Available in 5gal purple pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Synfilm® Recip

Reciprocating Air Compressor Oil

Synfilm  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
68 - 150 68 - 150 8.6 - 12.5
Colour
Density
Flash Point ASTM D-92
Purple 7.96 lbs/g ±1 485 - 495ºF
Applications:
Recommended for lubricating reciprocating air compressors (piston type).
 

Synfilm® Recip. is a long life, high film strength, energy efficient, synthetic lubricant that significantly increases the reliability and efficiency of reciprocating air compressors and reciprocating shop compressors. It excels at reducing wear and keeping discharge valves free of harmful carbon deposits.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applications Available in 5gal purple pailAvailable in pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Thermyl-Glyde®

Severe Service Gear and Bearing Oil

Thermyl Glyde  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
32 - 1500 32 - 1500 6.1 - 82.7
Colour
Density
Flash Point ASTM D-92
Purple 7.04 - 7.41 lbs/g 330 - 420ºF
Applications:
Recommended where heavy loads, shock loads, low operating speeds and / or high operating temperatures are encountered.
 

Thermyl-Glyde® is an ultra-tough, multi-synthetic lubricant for severe service gears, bearings, couplings and ways. It is noncorrosive to both ferrous and nonferrous metals and rapidly and completely separates from water, preventing the sludge and wear commonly found in wet gear boxes.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications Gears applicationsAvailable in pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

RP Thermyl-Glyde® WGO

Worm Gear Oil - Severe Service Gear Oil

Barrier Fluid  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
460 - 680 460 - 680 36.5 - 47.6
Colour
Density
Flash Point D-92
Purple 7.34 - 7.38 400ºF
Applications:
Recommended where heavy loads, shock loads, low operating speeds and / or high operating temperatures are encountered. Synergy Worm Gear Oil and fully synthetic Thermyl-Glyde Worm Gear Oil are Textron / Cone drive approved.
 

Contains slippery synthetic molecules plus special anti-wear additives to provide the lubricity and oiliness properties necessary to excel in worm gear lubrication. Utilizes a dense, high molecular weight, synthetic cushioning additive that protects against fatigue failure from sudden shock loads.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications Gears applicationsAvailable in 5gal purple pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  
 

Royal Purple Thermyl-Tuff®

Maximum Load Synthetic Lubricant

Thermyl Tuff  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
100 - 300 100 - 300 149 - 457
Colour
Density
Flash Point ASTM D-92
Purple 7.59 - 7.63 lbs/g 335 - 385ºF
Applications:
Recommended for heavily loaded open gears, skid rails, bushings, couplings, bearings, cables, etc., or low speed bearings operating at high temperatures.
 

Thermyl-Tuff® is a viscous, tacky, semi-fluid lubricant that protects extremely heavily loaded sliding surfaces such as open gears, skid rails, etc., where other EP products perform poorly or even fail.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications Gears applicationsAvailable in pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Ultra-Performance® Grease

Multi-Purpose Synthetic Grease

UPG  
NLGI Grade
Viscosity 40ºC
Density
1 - 2 150 7.5 lbs/g
Colour
Penetration ASTM D-217
Drop Point ASTM D-566
Purple 319 - 380 520ºF
Applications:
Satisfies a wide range of grease requirements and is recommended for bearings and general purpose use.
 

Ultra-Performance® Grease is a high performance, multi-service, aluminum complex, synthetic grease. Its outstanding EP capabilities and excellent water resistance to both emulsion and washout are achieved through its superior blend of synthetic base oils plus Synslide® additive technology.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications Compatible with other oils Available in tubeAvailable in pailAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple VP Preservative Oil 10

Vapor Phase Corrosion Inhibitor

VP Preservative Oil 10  
NLGI Grade
Viscosity 40ºC
Viscosity 100ºC
- 19.5 -
Colour
Density
Flash Point ASTM D-92
Purple 7.21 lbs/g 400ºF
Applications:
Recommended for use to prevent rust and corrosion in engines, gear boxes and other closed systems that will be stored for periods up to one year or more.
 

VP Preservative Oil 10 is a rust preventive oil that prevents the rust and corrosion of all metal surfaces to which it is applied. In addition, it fills any closed spaces with vapors to prevent rust and corrosion of surfaces not contacted by the oil.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applicationsCompatible with other oils Available in 5gal purple pailAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Royal Purple Wire Rope

Premium Corrosion and Wear Protection

Wire Rope  
ISO Grade
Viscosity 40ºC
Viscosity 100ºC
460 483 33.5
Colour
Density
Flash Point ASTM D-92
Purple 7.79 lbs/g 405ºF
Applications:
Extends the service life of wire ropes and cables over a wide range of temperatures and working conditions. Common applications include mining, marine and construction industries.
 

Wire Rope Lubricant is formulated with Royal Purple’s Synslide® additive technology. Synslide effectively penetrates wire ropes and forms a protective “polar bond” with metal surfaces to provide maximum protection under boundary lubrication conditions common in heavily loaded wire ropes and cables.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications Available in 5gal purple pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Slip-Plate® Aerosol (Asbury)

Dry Film Graphite Lubricant

 
  Min./Max. Continuous Temp.  
  -75ºF / 425ºF  
  Measured Viscosity; cps
 
  < 500  
Applications:
Works great on metal, wood, and most plastic surfaces.
 

The original heavy duty, dry film graphite lubricant. It produces a very slippery barrier that resists corrosion. The coating is naturally hydrophobic and will repel rain, snow.

   
 Low temperature applicationshigh temperature applicationswater applicationsCorrosion applicationsCompatible with other oils     Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Wax Stick

General Purpose Lubricant

Stick  
  Max. Surface Temp.  
  250ºF  
  Lubricating Solid
 
  Graphite  
Applications:
Designed to coat, lubricate and reduce friction on various surfaces.
 

Wax sticks are specifically formulated to be applied directly to area requiring lubrication for surface temperatures up to 250F.

   
 high temperature applicationswater applicationsCorrosion applications Available in tube   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Graphokote® 410-S & 495

Heavy Duty non-HAP Graphite Dry Film

Graphokote  
Density
Flash Point
Particle Size
8.3 lbs/g 57ºF -325 Mesh
Colour
Lubricating Solids
Solids Content
Black Bat. Flake Graphite 47%
Applications:
Quick-drying, heavy-duty non-HAP graphite dry film lubricant coating for use in metalworking and other HT applications.
 

Graphokote 495 performs well in extreme temperatures or dusty environments where oil-based lubrication is not feasible. .

   
 high temperature applicationswater applicationsCorrosion applications Available in canAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  
               
 

Asbury Hybake Supreme OCL

Oven Chain Lubricant

Hybake  
Density
Flash Point
Particle Size
- 421ºF 4 microns
Constistency Graphite Content
Solids Content
Fluid High Purity Natural Flake Graphite 11%
Applications:
Oven Chains.
 

Hybake Supreme is a premium high-temperature lubricant formulated with high-purity, ultra-fine graphite for maximum penetration into all moving parts. Permits ovens to be lubricated at higher temperatures, reducing costly downtime

   
 high temperature applicationswater applicationsCorrosion applications Available in canAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Hyheet Graphite Grease

High Temperature non-melt Graphite Grease

Stick  
NLGI
Operating Temp.
Penetration D-217
No. 2 Up to 550ºF 275 (worked 60)
Color Lubricating Solids Solids Content
Black Graphite 4%
Applications:
Will not melt or run out of bearings or fittings.
 

Hyheet graphite grease (NLGI#2) is a high-temperature, non-melting anti-wear grease fortified with graphite to lubricate and protect in temperatures up to 550ºF.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications Available in tubeAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Microfyne

Extra Finely Powdered

Flake  
NLGI Grade
Operating Temp. Particle Size
- - -325 Mesh
Type
Lubricating Solids Solids Content
Flake Carbon 95%
Applications:
Ideal for use in precision applications.
 

Excellent conductor of electricity. Commonly used as a conductive material and by both gunsmith and locksmith. Particle size is -325 mesh.

   
 high temperature applicationswater applicationsCorrosion applications Available in jarAvailable in canAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury No. 1 Large Flake

Graphite Powder

Flake  
NLGI Grade Operating Temp. Particle Size
- - 50 - 80 Mesh
Type Lubricating Solids Solids Content
Flake Carbon 90%
Applications:
Commonly used for general maintenance and lubrication where a large flake is required.
 

Ideal as a lubricant that is subject to water, alkali, gas, acid and brine. Particle size is a 50 x 80 mesh.

   
 high temperature applicationswater applicationsCorrosion applicationsCompatible with other oils Available in jarAvailable in canAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury No.2 Medium Flake

Graphite Powder

Flake  
NLGI Grade
Operating Temp. Particle Size
- - 50 - 200 Mesh
Type Lubricating Solids Solids Content
Flake Carbon 90%
Applications:
Commonly used in maintenance and general lubrication.
 

Ideal as a lubricant that is subject to water, alkali, gas, acid and brine. Particle size is a 50 x 200 mesh..

   
 high temperature applicationswater applicationsCorrosion applicationsCompatible with other oils Available in jarAvailable in canAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury  #205 Amorphous

Graphite Powder

 Flake  
NLGI Grade Operating Temp. Particle Size
- - -325 Mesh
Type Lubricating Solids Solids Content
Powder Carbon  99.5 %
Applications:
Utility grade graphite powder for use as carbon additive, pigment or release coating.
 

Economical lubrication where high-purity graphites are not required.

   
 high temperature applicationshigh pressure applications  Available in canAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury #635 Fine Flake

Graphite Powder

Flake  
NLGI Grade
Operating Temp. Particle Size
- - -100 Mesh
Type Lubricating Solids Solids Content
Flake Carbon 95%
Applications:
Ideal for use in precision applications.
 

Excellent conductor of electricity. Commonly used in machine shop applications where close tolerances are needed. Particle size is -100 mesh.

   
 high temperature applicationswater applicationsCorrosion applicationsCompatible with other oils Available in jarAvailable in canAvailable in kegAvailable in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Railroad 460

Railroad Switch plate Lubrication

RR460  
Density
Flash Point
Particle Size
8.1 lbs/g 57ºF -325 Mesh
Colour
Lubricating Solids Solids Content
Black Natural Flake Graphite 44%
Applications:
Railroad 460 is a heavy duty lubricating graphite coating formulated for railroad switch plate lubrication.
 

It is an excellent lubricant for the rough, demanding requirements of railroad switches. Railroad 460 is quick drying, durable, weather and corrosion resistant, and will not pick up dirt, dust or grit. It has a flash point of 57F.

   
 Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applications Available in canAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Railroad 470

Railroad Switch plate Lubrication

RR470  
Density
Flash Point Particle Size
8.5 lbs/g 57ºF -325 Mesh
Colour Lubricating Solids Solids Content
Black Natural Flake Graphite 47%
Applications:
Railroad 470 is a heavy duty lubricating graphite coating formulated for railroad switch plate lubrication.
 

It is an excellent lubricant for the rough, demanding requirements of railroad switches. Railroad 470 is quick drying, durable, weather and corrosion resistant, and will not pick up dirt, dust or grit. It has a flash point of 57F.

   
 Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applications Available in canAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Asbury Regular Oven Chain Lubricant

Oven Chain Lubricant

Oven Chain  
Density Flash Point Particle Size
- 176ºF 13 Microns
Type Lubricating Solids Solids Content
Fluid Natural Amorphous Graphite 25%
Applications:
Oven Chains.
 

OCL Regular is a high quality graphite cold oven chain lubricant. It coats all moving parts with a soft film of graphite after all the liquid distillate evaporates, reducing downtime for cleaning and repairs. It has a flash point of 176F and should be applied at temperatures 150F and lower.

   
 high temperature applicationswater applicationsCorrosion applications Available in canAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  
               
 

Saf-T-Eze Belt-Dress

Belt-Dress

Belt-Dress  
Density Flash Point Particle Size
- -40ºF -
Type Specific Gravity
Solids Content
- 0.9 gm/cc -
Applications:
Flat, round and v-belts of all sizes.
 

Belt-Dress is formulated to meet industrial demand for increased operating efficiency and longer belt life. It reduces stiffness and restores flexibility to worn and checked belts.

   
 Low temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Contact-Clean

Anti-Seize Compound

Dry-Molly  
Density Boiling point
Particle Size
- 160ºF -
Spec. Gravity @25ºC
Flash Point
Evaporation Rate
1.33 gm/cc None 4.5
Applications:
Designed to remove carbon deposits, grease, oil and corrosion deposits from electrical equipment. Compatible with most metals, plastics and elastomers.
 

Electrical Contact-Clean is a specially formulated solvent designed to remove carbon deposits, grease, oil and corrosion deposits from electrical equipment. After cleaning, check and oil parts that need lubrication. Eliminates noise caused by dust and dirt.

   
 Low temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Moly Grade Anti-Seize

Molybdenum anti-seize Compound

Anti-Seize  
NLGI Grade
Operating Temperature
Particle Size
3-4 -65ºF - 650ºF 1 mil Max.
Spec. Gravity
Flash Point
Drop Point
1.5 450ºF 380ºF
Colour Penetration ASTM D-21 Conmposition
Black 220 ±20 Molybdenum
Applications:
Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers or as a gasket release agent, etc.
 

Moly Grade Anti-Seize is a low friction lubricant that prevents wear or galling on gears or splines operating under high load at low speed. Will withstand pressures to 500,000 psi.

   
Low temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Dry Moly

Molybdenum anti-seize Compound

Dry-Molly  
Density Operating Temperature
Particle Size
- -100ºF - 2400ºF -
Spec. Gravity
Flash Point
Drop Point
1.6 - -
Colour Penetration ASTM D-21 Conmposition
Dark Grey - Molybdenum
Applications:
For general plant maintenance and environments where clean dry lubrication is required. Ideal for various applications from -100ºF to 650ºF.
 

Resistant to water and water based solutions. Exposure to temperatures above 375ºF will add resistance to solvents. Dry Molly is recommended for high temperature applications where parts are exposed to continuous sliding friction. Ideal lubricant in dusty environments.

   
Low temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze FD Grade Anti-Seize

Stops corrosion, galling, and seizure between metal parts.

Anti-Seize  
NLGI Grade Operating Temperature Particle Size
3 - 4 -65ºF - 500ºF 1 mil max.
Spec. Gravity Flash point C.O.C. Drop point
1.1 390ºF 300ºF
Colour
Penetration
Composition
White 240 ±20 PTFE*
Applications:
Use on threaded parts, bushing, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, or as gasket release agent, etc (* and proprietary solids)
 

SAF-T-EZE® Food/Drug Grade Anti-Seize has been formulated to meet rigorous USDA requirements. This product is odorless, tasteless, non-staining and corrosion resistant.

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsmetal to metal applications  Compatible with other oils Food applicationsAvailable in jarAvailable in jarAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Gasket-Off

For Metal Surfaces

Gasket Off  
NLGI Grade
Operating Temperature Viscosity 100ºC
  -  
Spec. Gravity Flash point
Drop Point ASTM D-2265
1.2 gm/cc -40ºF -
Applications:
To remove gasket, gasket cement, carbon deposits, dried oils, grease and paint from metal.
 

Gasket-Off is designed with hydrocarbon thickeners and propellants which disperse as a foamy white cream to remove baked-on gaskets, gasket cement, carbon deposits, dried oils, greases and paint from metal in 10 minutes.

   
Low temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Lok Industrial Pipe Sealant

ITPS Pipe Sealant

Pipe seal  
Spec. Gravity
Viscosity
Particle Size
1.15 gm/cc 500000 cps 40 microns
Colour
Temperature Range
Flash Point
White -65ºF - 400ºF 860ºF
Applications:
Performs on all metal threaded pipes including Stainless Steel and Aluminum.
 

Specialized single component, solvent free compounds that are individually formulated for locking, sealing, retaining and bonding metal parts and assemblies.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Pipe Seal

PTFE Pipe Sealant

Pipe seal  
Spec. Gravity
Viscosity
Particle Size
1.3 gm/cc - -
Colour
Temperature Range Flash Point C.O.C
White -40ºF - 500ºF 350ºF
Applications:
To Seal kerosene, LP gas, oil, water, weak caustic acids and low pressure steam.
 

Pipe-Seal is compounded with PTFE to lubricate joint assembly. It is resistant to chemicals and can be used on pipes larger than 3/4" diameter.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications  Available in jarAvailable in jarAvailable in can   Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Nickel Grade Anti-Seize

Meets MIL-A-907D & MIL-PRF-907E

Anti-Seize  
NLGI Grade Operating Temperature Particle Size
3 -65ºF - 2600ºF 1 mil max.
Spec. Gravity Flash point C.O.C. Drop point
1.2 500ºF 380ºF
Colour
Penetration
Composition
Silver Gray 270 ±20 Nickel/Alum./Graphite
Applications:
Recommended when very different metals are used together such as brass and steel or where high nickel alloy metals such as stainless steel are involved.
 

Nickel Grade Anti-Seize is compounded from fine particles of nickel, aluminum and graphite in a heat resistant lubricant and performs particularly well as nickel lubricates and keeps the metallic surfaces apart even under high pressure

   
 Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils  Available in jar to Available in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Nuclear Grade Anti-Seize

Nickel Grade anti-Seize

Anti-Seize  
NLGI Grade Operating Temperature Particle Size
3 - 4
-65ºF - 2600ºF 1 mil max.
Spec. Gravity Flash point C.O.C. Drop point
1.2 440ºF 500ºF
Colour
Penetration
Composition
Silver Gray 270 ±20 Nickel/Graphite
Applications:
Use on threaded parts, bushings, gears, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger bolts, manifold bolts, or as gasket release agent etc.
 

Formulated from the highest purity grease to minimize sulphur, halogens, mercury, etc. Nuclear Nickel, Stainless and Copper Grades anti-seize are available. These products meets MIL-A-907D, MIL-PRF-907E and exceeds the requirements of General Electric, Bechtel and Westinghouse

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Pure-Copper Grade Anti-Seize

Copper Grade

Anti-Seize  
NLGI Grade Operating Temperature Particle Size
3
-65ºF - 2000ºF 1 mil max.
Spec. Gravity Flash point C.O.C. Drop point
1.2 500ºF 380ºF
Colour
Penetration
Composition
Copper 270 ±20 Copper/Graphite
Applications:
Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
 

Copper Grade Anti-Seize can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils  Available in jar to Available in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Regular Grade Anti-Seize

Regular Grade

Anti-Seize  
NLGI Grade Operating Temperature Particle Size
3
-65ºF - 2000ºF 1 mil max.
Spec. Gravity Flash point C.O.C. Drop point
1.2 500ºF 380ºF
Colour
Penetration
Composition
Copper 270 ±20 Copper/Alum./Graphite
Applications:
Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.
 

Regular Grade Anti-Seize can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. Surface need not be cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required

   
Low temperature applicationshigh temperature applicationshigh pressure applicationswater applicationsCorrosion applicationsCompatible with other oils  Available in jar to Available in drum   Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Pen-Oil

Lubricates and Protects

Pen-Oil  
Specific Gravity
Film Thickness
Volatiles
0.6 gm/cc
.03 mils 90%
Surface Tension
Falex Lubricity
Flash Point
23.4 dynes.cm 1750 lbs -40ºF
Type
Coverage
Weight per Gallon
Aerosol 5100 Sq.Ft./gal 5 lbs
Applications:
Use on steel, aluminum, brass, copper, magnesium, nickel and other commonly used metals and alloys. Safe for Rubber, plastics or painted surfaces.
 

Pen-Oil is a hydrocarbon based compound formulated with low surface tension to allow it to penetrate accumulated grease and grit deposits as well as rust and other corrosion. It displaces moisture and clings to metal providing a thin protective film against oxidation.

   
Low temperature applicationswater applicationsCorrosion applicationsCompatible with other oils     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Silicone Lube FD

Food/Drug Grade

Silicone Lube  
Surface Tension
Temperature Range
Flash Point
21 dynes/cm -60ºF - 500ºF 600ºF CC
Type
Specific Gravity
Solvent
Aerosol 0.7. gm/cc Hexane
Applications:
Silicone-Lube Food/Drug Grade meets the requirements of the United States Department of Agriculture for incidental food contact in plants operating under Federal Meat and Poultry Inspection Program.This product is NSF registered.
 

Silicone-Lube Food/Drug Grade is formulated from the highest quality silicone fluids to provide an extended range of lubrication where conventional hydrocarbons and oils vaporize. These silicone fluids penetrate the surface of plastics and rubber as well as metals to provide a non-tacky film of lubrication

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applicationsFood applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze Structural Adhesive SA-5

Instant Bonder

SA-5  
Bottle/Parts
Specific Gravity
Viscosity
2 1.1 gm/cc / 1.3 gm/cc 5000 cps / 2-5 cps
Colour
Solids Content
Flash Point
Amber 100% / 5% 200ºF / 250ºF
Applications:
Provide high strength bonds on oily surfaces, on porous surfaces and, on surfaces with large gaps in between
 

SAF-T-LOK® Structural Adhesives are designed to satisfy the demands of industry for large gap filling, high impact and shock resistance bonds. They conveniently dispense and cure with activators, UV light source or heat.

   
water applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze T-Gel Lube

High Pressure Lubricant

T-Gel  
V.O.C.
Temperature Range
Viscosity 100ºC
63% -30ºF - 550ºF -
Colour
Penetration ASTM D-21
Propellant
Clear - Hydrocarbon
Applications:
Door hinges, open gears, wire rope and cables, chains and sprockets, conveyors, manifold heat valves.
 

T-Gel Lube is a transparent, high pressure lubricant with high adhesive strength. A unique combination of natural and synthetic lubrication agents coupled with a high molecular weight polymer (PTFE) make of this product one of the best available.

   
Low temperature applicationshigh temperature applicationswater applicationsCorrosion applicationsFood applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Lok Instant Bonders

IB Series

Instant Bonders  
IB-5 Penetrating IB-45 General Purpose IB-100 Plastic bonder
Viscosity (cps) Viscosity (cps) Viscosity (cps)
5 45 100
Gap Fill (in.) Gap Fill (in.) Gap Fill (in.)
0.002 0.003 0.004
IB-1500 Gap Filling IB-HT - Hi-Temp IB-GEL
Viscosity (cps) Viscosity (cps) Viscosity (cps)
1500 100 50000
Gap Fill (in.) Gap Fill (in.) Gap Fill (in.)
0.010 0.004 0.015
IB-B - Impact (black) IB-SI - Surface Insensitive IB-NF - Non-Frosting
Viscosity (cps) Viscosity (cps) Viscosity (cps)
3000 100 100
Gap Fill (in.) Gap Fill (in.) Gap Fill (in.)
0.012 0.01 0.01
Applications:
Applications: paper mill dryers, ball mills in mining
applications and trunnion bearings.
 

SAF-T-LOK® Instant Bonder Cyanoacrylate Adhesives provide exceptional tensile shear strengths within seconds at room temperature. Materials such as metals, plastics, rubber and glass may be bonded with these single part adhesives

   
 Low temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Saf-T-Eze 732 RTV Silicone Sealant

732 RTV Hi-Temp Silicone Sealant

732  
Spec. Gravity Operating Temperature Particle Size
1.04 -65ºF - 650ºF 1 mil max.
Tensile Strength
Shore A Hardness
Elongation
350 min. 32 500 min.
Colour
Shelf Life
Recovery
Red 12 Months at below 90ºF 100%
Applications:
Silicone cures rapidly to a strong, durable, flexible rubber at room temperature and bond to a wide range of substrate materials including metals, glass, most plastics, fabric, wood, ceramics, etc.
 

RTV (Room Temperature Vulcanizing) Silicone Sealants offer a high performance product designed for a broad variety of sealing and bonding requirements in original equipment manufacturing or for maintenance needs.

   
 Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications  Available in tubeAvailable in pail   Material Safety Data Sheet Technical Data Sheet Request Quote  
 

OTHER

Robco Break-In Lubricant

For Packing Applications

   
Specific Gravity @25ºC
Temperature Range
Flash Point
0.970 -60ºF - 500ºF 620ºF CC
Color
Coeff. of expansion
Pour Point
Clear 0.00096 cc/cc/ºC -58ºF
Applications:
All general compression packing applications. Not recommended with oxygen systems.
 

Superior quality Break-In Lubricant for all packing applications. Robco Break-In Lubricant is specially formulated to facilitate the installation of new packing and prevent burning upon start-up.

   
 Low temperature applicationshigh temperature applicationswater applicationsCorrosion applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 490 Neoprene Cement

Adhesive

   
Specific Gravity Viscosity
Solids
0.830 gm/cc 1600 ±100 cps 22 ±0.5%
Color
Odor
Yellowish Ketone  
Applications:
Used for bonding difficult substrates like wood, presswood, plywood,metal,laminated, veneer, formica, arborite etc.
 

490 Neoprene Cement is a neoprene, solvent based adhesive. It is a premium quality grade, for high strength bonding of laminated panels or press wood.

   
 high temperature applicationshigh pressure applications     Material Safety Data Sheet Technical Data Sheet Request Quote