With over 105 years of experience, Robco has the expertise to guide and provide the best possible Rubber Gate Seal for your project.
Technical Support includes:
• Gate Seal Tolerance Charts • Installation Supervision • Compression & Deflection Data
|
Typical Seals:
Metal Clad Seals Fluorocarbon Clad Seals |
|
Available for lease: The Robco Gate Seal Hot Vulcanizer Kit is equipped with all the tools necessary to vulcanize rubber gate seal parts on-site: a hot vulcanizing splicer, splice mould, spacer bars, mitre box for cutting pieces (including saw and knife), raw rubber, splice adhesive, toluene thinner, heat resistant gloves, assorted tools (wrench, screwdriver, etc.), extension cord, clamps, paint brushes, wooden braces to keep long rubber parts level during splicing procedures. No need to lift the machine o the pallet during use. The four wooden braces included for ease of use keep the rubber level. A sturdy removable cover protects the machine and components during transport or storage. The Robco Gate Seal Hot Vulcanizer comes with a step-by-step instruction manual. 220 volt-15 amp outlet required to operate the vulcanizer. |
FOR RUBBER PRODUCTS AND OTHER ROBCO PRODUCT LINES.
LEXICON:BULKHEAD: |
RADIAL GATE: A gate with a curved skin or face plate connected with steel arms to a trunnion or axle. It is usually lifted or lowered by a cable connected to a hook at the top of the gate, rotating on the trunnion shaft as it is moved. This type of gate is used at an opening in the top of a dam to control the water reservoir level, since it can be opened partially to control the amount of flow. ROLLER GATE: A gate used in a levee opening for flood control, usually being so wide or long that rollers are required at the bottom to support it during opening and closing. SLICE GATE: Usually a smaller rectangular type of gate used to control water level or flow, but may also be a small radial type of gate. SPILLWAY: An opening in a dam for water overflow usually closed off with some type of gate (radial or vertical lift) but may be uncontrolled, that is, just an open area for high water to overflow. STOPLOG: Similar to bulkhead but smaller and stacked in sections on top of each other. SWING GATE: A small to medium size gate, used in a levee opening, that is equipped to swing on hinges from one end to open or close for flood control. TAINTER GATE: Another name for a radial gate. TAINTER VALVE: A radial type gate used in a submerged location such as in a navigation lock where it is used to open of close water passages which flood or drain the lock. TRASH RACK: A metal grid structure placed upstream of a gate such as an intake gate to catch trash and debris preventing it from entering a water passage where it could damage equipment such as a turbine. WHEEL GATE: A rectangular vertical lift gate designed with a number of wheels fixed on axles on each side which move up and down on slots built in on either side of the gate opening. This type of gate is |